|
|
|
|
|
|
8MM Rod & Cone Set
|
Our Price: $27.00
|
|
|
Cones range from 8mm through 21mm. Conventional set screw lock on 8mm (nominal) tool steel rod (INCLUDED). Cones are Polyethylene w/ brass set screws. Free hex wrench included! Lifetime warranty.
Great for unique and vintage bikes with small axle size (8mm or greater). Check your axle size for confirmation before ordering.
|
|
|
|
|
|
|
|
|
|
|
|
|
8mm Center Post Tip Insert
|
|
Our Price: $8.00
|
|
|
The new, No-Mar, optional Tip Insert will fit into your existing Classic model and Jr Pro model tire changer center post. This handy new tip insert provides a scratch proof base(insert) with a steel pin for smaller axle holes, etc. The other end of the bar is left unaffected.
High Impact UHMW body with Steel Pin
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal Low Profile Turn Signal Bracket
|
|
Our Price: $12.00
|
|
|
Using one of our super sleek replacement brackets for your license plate? Add this bracket via the license plate mounting holes, then bolt on turn signals of your choice! (not included)
Our Black, powder coat finish, bracket bolts in place with existing hardware and removes excess bulk and weight from your bike.
Bolts not included, no additional hardware is needed for installation. Use existing license plate hardware.
PLEASE NOTE: This bracket is included with our FZ1 Bracket, do not order it separately.
|
|
|
|
|
|
|
|
|
|
|
|
|
Low Profile FZ1 Exhaust Hanger Bracket with Cargo Ring 2
|
|
Our Price: $19.00
|
|
|
Lose the BULK!! Scrap those bulky parts and use our super strong, lightweight exhaust hanger bracket. Comes with OPTIONAL luggage/cargo ring for the exhaust side. (see photo)Fits 2006-2009 Models.
Our Black, powder coat finish, bracket bolts in place with existing hardware (If cut shorter) and removes excess bulk and weight from your bike.
Comes complete with THREE (3) brackets: two (2) brackets for the cargo tie downs and one(1) for the exhaust carrier.Bolts not included.
FIts 2006-2009 Models Only
|
|
|
|
|
|
|
|
|
|
|
|
|
Low Profile FZ1 Exhaust Hanger Bracket with Integral Cargo Ring 1
|
|
Our Price: $19.00
|
|
|
Lose the BULK!! Scrap those bulky parts and use our super strong, lightweight exhaust hanger bracket. Comes with integral luggage/cargo rings. (see photo) Fits 2006-2009 Models.
Our Black, powder coat finish, bracket bolts in place with existing hardware and removes excess bulk and weight from your bike.
Comes complete with one (1) bracket for the exhaust side, and one(1) for the non-exhaust side, bolts not included, use existing hardware (If cut shorter or use new hardware).
FIts 2009 Models Only
|
|
|
|
|
|
|
|
|
|
|
|
|
FZ1 Low Profile License Plate Bracket
|
|
Our Price: $39.00
|
|
|
Replace that bulky factory license place holder with our super sleek replacement bracket.
Our Black, powder coat finish, bracket bolts in place with existing hardware and removes excess bulk and weight from your bike. Fits 2006-2009 Models.
Hardware not included. Turn signals not included. SEE our LED Mini Turn Signals and License Plate lighting. Will work with all of our brackets (Hole enlargement may be required for certain Lighting fitments)
Comes complete with optional Turn Signal mounting bracket!
FITS: FZ1 2009 ONLY
|
|
|
|
|
|
|
|
|
|
|
|
|
V-Max Low Profile Tidy-Tail License Plate Bracket With Signal Bracket
|
|
Our Price: $59.00
|
|
|
Lose the BULK!! Scrap those bulky parts and use our super strong, lightweight license plate bracket. Comes with an optional turn signal bracket (turn signals NOT included). (see photo) Fits 2009-2010 Models.
Our Black, powder coat finish, bracket bolts in place with existing hardware and removes excess bulk and weight from your bike.
Comes complete with one (1) bracket for the license plate, and one (1) turn signal bracket, bolts not included, use existing hardware.
|
|
|
|
|
|
|
|
|
|
|
|
|
Yamaha R1 Low Profile License Plate Bracket
|
|
Our Price: $19.00
|
|
|
Replace that bulky factory license place holder with our super sleek replacement bracket.
Our Black, powder coat finish, bracket bolts in place with existing hardware and removes excess bulk and weight from your bike.
Bolts not included, no additional hardware is needed for replacement. Use existing hardware.
FITS 2009 MODEL YAMAHA R1--We have these with 50mm Clearance and 70mm clearance. That distance is from mounting point to top edge of license plate.
50mm is shown in the photo but 70mm is required for stock exhaust. SELECT YOUR OPTION ABOVE.
Also-If you would like a bracke with side marker light option let us know. We will make them if people want them.
|
|
|
|
|
|
|
|
|
|
|
|
|
Yamaha R1 Rear Peg Removal Brackets
|
|
Our Price: $20.00
|
|
|
Rear pegs... who needs rear pegs? Ditch those chunks of dead weight and use our super light, super sleek replacement brackets.
Both left and right brackets easily bolt in place with existing hardware, and allow easy re mounting of your rear brake reservoir.
Black powder coat finish.
Use existing bolts and add nuts.
FITS 2009 MODEL YAMAHA R1
|
|
|
|
|
|
|
|
|
|
|
|
|
SV650-1000 LICENSE BRACKET WITHOUT TURN SIGNAL
|
|
Our Price: $39.00
|
|
|
SV650-1000 LICENSE BRACKET WITHOUT TURN SIGNAL
fits 2003-2009 "Standard" and "S" models
|
|
|
|
|
|
|
|
|
|
|
|
|
SV650-1000 LICENSE BRACKET W/TURN SIGNAL
|
|
Our Price: $44.00
|
|
|
SV650-1000 LICENSE BRACKET W/TURN SIGNAL
fits 2003-2009 "Standard" and "S" models
|
|
|
|
|
|
|
|
|
|
|
|
|
Tank Protector Carbon
|
|
Our Price: $20.95
|
|
|
* Protects tank from zippers, other wear
* Simple stick-on adhesive makes mounting easy
* Great carbon fiber look
* Measures 5 1/2" x 8"
* Sold each
|
|
|
|
|
|
|
|
|
|
|
|
|
Spoke Wrench - Heavy Duty Rowe Super 6
|
|
Our Price: $9.95
|
|
|
Rowe Heavy Duty Super 6 Spoke Wrench
-Fits six different spoke sizes.
-Instructions included with Packaging.
|
|
|
|
|
|
|
|
|
|
|
|
|
Classic Model® Upper Arm Upgrade - PRE 2009 Models ONLY
|
|
Our Price: $32.00
|
|
|
This is a replacement upper arm assembly for your existing 2004-2008 Classic Model Tire Changer. This new upper arm is STOCK on all NEW Classic Models. Our redesigned upper arm assembly requires no adjustment and is works great.
*Do NOT order this product if you are ordering a Classic Model Tire Changer; it is already a standard feature of all new Classic Models.
|
|
|
|
|
|
|
|
|
|
|
|
|
Rim Protectors
|
|
Our Price: $9.95
|
|
|
-Protect your wheels from scratches and dings caused by steel tire changing tools
-Includes retrieval cord for easy use
-Sold in pairs
|
|
|
|
|
|
|
|
|
|
|
|
|
Tank Protector Carbon SM
|
|
Our Price: $17.95
|
|
|
* Smaller version of the popular resin tank protector
* Peel and stick on your tank or frame where protection is needed
* Great carbon fiber look
* Sold each
|
|
|
|
|
|
|
|
|
|
|
|
|
ReUsable Spoke Wheel Weights 6pc. - Brass
|
|
Our Price: $19.95
|
|
|
Reusable Spoke Wheel weights, (2) 1 oz,(2) 1/2 oz, (2) 1/4 oz
|
|
|
|
|
|
|
|
|
|
|
|
|
ReUsable Spoke Wheel Weights 8pc. - Nickel
|
|
Our Price: $29.00
|
|
|
8pc. Nickel Reusable Spoke Wheel weights: (2) 1 oz, (2) 3/4 oz, (2) 1/2 oz, (2) 1/4 oz
|
|
|
|
|
|
|
|
|
|
|
|
|
Chrome 8-pack Spoke Wheel Weights
|
|
Our Price: $15.95
|
|
|
One complete 8-pack of Chrome spoke wheel weights
2 each Chrome 1/4 oz.
2 each Chrome 1/2 oz.
2 each Chrome 3/4 oz.
2 each Chrome 1 oz.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lead 10-pack Spoke Wheel Weights
|
|
Our Price: $13.95
|
|
|
One complete 8-pack of Lead spoke wheel weights
2 each Lead 1/4 oz.
2 each Lead 1/2 oz.
2 each Lead 3/4 oz.
2 each Lead 1 oz.
2 each Lead 1.5 oz.
|
|
|
|
|
|
|
|
|
|
|
|
|
Swingarm Spools by No-Mar 10mm
|
|
Our Price: $8.00
|
|
|
No-Mar has new Swing Arm spools! These UHMW spools give much needed protection to the vulnerable swing arm during a crash. Also works as a rear stand button.
10mm Swing arm spools - Kawasaki
General fitment guide, please choose your size.
|
|
|
|
|
|
|
|
|
|
|
|
|
Swingarm Spools by No-Mar 8mm
|
|
Our Price: $8.00
|
|
|
No-Mar has new Swing Arm spools! These UHMW spools give much needed protection to the vulnerable swing arm during a crash. Also works as a rear stand button.
8mm Swing arm spools - Ducati 749/999, Honda, Suzuki
General fitment guide, please choose your size.
|
|
|
|
|
|
|
|
|
|
|
|
|
Swingarm Spools by No-Mar 6mm
|
|
Our Price: $8.00
|
|
|
No-Mar has new Swing Arm spools! These UHMW spools give much needed protection to the vulnerable swing arm during a crash. Also works as a rear stand button.
6mm Swing arm spools - Triumph, Yamaha
General fitment guide, please choose your size.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Straight Valve Stem - 8mm
|
|
Our Price: $12.95
|
|
|
- Increased Valve Stem Replacement Intervals
- Made of lightweight aluminum for less weight.
- For use on most tubeless tire rims.
- Sold individually.
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum Straight Valve Stem - 10mm
|
|
Our Price: $12.95
|
|
|
- Increased Valve Stem Replacement Intervals
- Made of lightweight aluminum for less weight.
- For use on most tubeless tire rims.
- Sold individually.
|
|
|
|
|
|
|
|
|
|
|
|
|
90 Degree Low Profile Valve Stem - 8mm
|
|
Our Price: $17.95
|
|
|
- Right-angle valve stem makes inflating tires on dual disc wheels easy.
- Angled valve stem is a direct 90 degree bend from the surface of the wheel rim.
- Ends the hassle of wrestling the air chuck between the brake discs.
- Made of lightweight aluminum for less weight.
- For use on most tubeless tire rims.
- Sold individually.
|
|
|
|
|
|
|
|
|
|
|
|
|
90 Degree Low Profile Valve Stem - 10mm
|
|
Our Price: $17.95
|
|
|
- Right-angle valve stem makes inflating tires on dual disc wheels easy.
- Angled valve stem is a direct 90 degree bend from the surface of the wheel rim.
- Ends the hassle of wrestling the air chuck between the brake discs.
- Made of lightweight aluminum for less weight.
- For use on most tubeless tire rims.
- Sold individually.
|
|
|
|
|
|
|
|
|
|
|
|
|
Kleen Chain Synthetic Chain Lube
|
|
Our Price: $13.95
|
|
|
- 100% Synthetic
- Safe for all chains
- Improves Performance
- Reduces Wear and Friction
- No Fling Formula
- Won't Wash Off
- Glide on Applicator
- Reduces Chain Stretch
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP-N-GO Pocket Tire Plugger
|
|
Our Price: $31.95
|
|
|
● Nozzle
● Tire Plugging Device
● Probe Tool
● Reamer/Rasp Tool
● Hex Wrench
● (15) Mushroom Plugs (5/16" diameter shaft
x 3/4" length stem)
● Retractable Razor Knife
● Extra Zip Lock Bag
● Laminated Instructions
● Vinyl Zippered Pouch (7.5" x 3.5" x 1")
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP-N-GO Pocket Tire Plugger w/ C02 System
|
|
Our Price: $45.00
|
|
|
Don't get caught on the roadside without this 'trip-saving' device! The STOP-N-GO easily repairs flat tubeless tires while still on the rim. Ride more and stop waiting for help. Stay on the road with this invaluable kit...
The fastest, most efficient way to repair a tubeless tire while it is still on the wheel. Plugging device drives the mushroom-shaped plugs into the hole with a twist of the Allen wrench. Plug then expands under pressure to fill the punctured area. A firm pull of the stem seats the mushroom head on the inner wall allowing no air to escape.
Kit includes:
● Nozzle
● Tire Plugging Device
● (4) Steel Canisters containing 16 grams
each of 100% pure high-velocity CO2 gas
● Probe Tool
● Reamer/Rasp Tool
● Hex Wrench
● (15) Mushroom Plugs (5/16" diameter shaft
x 3/4" length stem)
● Retractable Razor Knife
● Extra Zip Lock Bag
● Tire Valve Adapter with brass fittings
● Instructions for use of CO2 inflation
system
● Vinyl Zippered Pouch (8" x 5" x 1")
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP-N-GO Tire Plugger w/ Insertion Gun
|
|
Our Price: $38.95
|
|
|
Flats Happen! Most vehicles run on tubeless tires these days. Regardless of thickness or pre-sealant additives they're all vulnerable to being punctured. Now you can experience the skill of a professional's hand and the thrill of saving time and money. Your tires can now be easily plugged on or off the wheel with this new shop style tool called the TIRE PLUGGER.
The Gun is a spring loaded device that 'drives' the plug into the hole. The shaft of the plug expands under pressure to fill the puncture. The mushroom head of the plug seats on the inner wall allowing no air to escape. This insures maximum reliability from its' revolutionary design. The vinyl zippered pouch measures 6 1/2" x 9" x 1" It's easily stored - so you're always prepared.
● Tubeless Tire Plug Gun
● Nozzle & Probe Tool
● (25) 5/16" diameter shaft x 3/4" rubber mushroom plugs
● Reaming Tool
● Retractable Razor Knife
● Full Instructions
● Vinyl Zippered Pouch (9" x 6" x 1")
● Weights: 2 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP-N-GO Automatic Tire Inflation Kit
|
|
Our Price: $21.95
|
|
|
● (4) Steel Canisters containing 16 grams
each of 100% pure high-velocity CO2 gas
● Tire Valve Adapter with brass fittings
● Full Instructions
● Compact Vinyl Zippered Pouch (5" x 3.5" x
1")
● Laminated Instructions
● Vinyl Zippered Pouch (7.5" x 3.5" x 1")
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP-N-GO TIRE PLUGS REFILL
|
|
Our Price: $8.00
|
|
|
Bag of 25 Mushroom Plugs - 5/16" x 3/4"
For use with:
-The Tire Plugger - w/Insertion Gun
-Pocket Tire Plugger -w/CO2 Inflation
|
|
|
|
|
|
|
|
|
|
|
|
|
PLEXUS PLASTIC CLEAN 7 OZ
|
|
Our Price: $11.95
|
|
|
PLASTIC CLEANER, PROTECTANT AND POLISH
* Cleans as it polishes!
* The most effective polish/cleaner for your cycle?anything made of plastic
* Great for face shields, helmets, goggles, fairings, saddlebags, eyeglasses, household items, laminated surfaces, etc.
Safe and nonabrasive?won't scratch delicate surfaces. Finish looks better than ever?without smears or smudges. Seals plastic "pores" against debris, oil, scratches and yellowing. Simply spray on and wipe! No rubbing or buffing as with ordinary cleaners. No waste or mess. Aerosol applicator prevents dripping, leaking or clogging at the tip. Anti-static properties repel dust and dirt.
|
|
|
|
|
|
|
|
|
|
|
|
|
PLEXUS 1/2OZ
|
|
Our Price: $4.95
|
|
|
PLASTIC CLEANER, PROTECTANT AND POLISH
* Cleans as it polishes!
* The most effective polish/cleaner for your cycle?anything made of plastic
* Great for face shields, helmets, goggles, fairings, saddlebags, eyeglasses, household items, laminated surfaces, etc.
Safe and nonabrasive?won't scratch delicate surfaces. Finish looks better than ever?without smears or smudges. Seals plastic "pores" against debris, oil, scratches and yellowing. Simply spray on and wipe! No rubbing or buffing as with ordinary cleaners. No waste or mess. Aerosol applicator prevents dripping, leaking or clogging at the tip. Anti-static properties repel dust and dirt.
|
|
|
|
|
|
|
|
|
|
|
|
|
Apron
|
|
Our Price: $20.00
|
|
|
This No-Mar Apron will keep your clothes nice and clean before and after changing a tire.
|
|
|
|
|
|
|
|
|
|
|
|
|
RAZOR SHORT STALK LED TURN SIGNAL - Black Body - Amber Lens
|
|
Our Price: $45.00
|
|
|
LOCKHART PHILLIPS USA RAZOR SHORT STALK LED TURN SIGNAL BLACK BODY/AMBER LENS LP #122-8251
* Sharp looking short stalk that is thin and visible
* Stylish lens with Amber LED on backside for better visual
* Ultra-Brite LED’s
* Sold in pairs
|
|
|
|
|
|
|
|
|
|
|
|
|
LED ULTRA MINI MARKER LIGHTS SHORT STALK BLACK W/AMBER ILLUMINATION
|
|
Our Price: $59.00
|
|
|
LED ULTRA MINI MARKER LIGHTS -PU #2040-0312
Oval w/Short Stem
Dimensions: 60MM L x 24MM Lens W,
15 LEDS
Black body
SOLD IN PAIRS
|
|
|
|
|
|
|
|
|
|
|
|
|
Scoop LED Lic. Plate, Marker, or Turn Signal Amber illumination w/Clear Lens
|
|
Our Price: $14.00
|
|
|
LOCKHART PHILLIPS USA SCOOP LED TURN SIGNAL AMBER ILLUMINATION W/CLEAR LENS LP #122-0011
* Great for license plate illumination or marker light use
* P’s Scoop can be mounted anywhere and includes built in(Super Duty in our opinion) double sided tape
* Amber color is not annoying to riders behind you! Looks cool too!
* Patented design
* Size 1 - 3 / 4 X 1 - 3 / 8
EACH LIGHT SOLD SEPARATELY, NEED TO BUY TWO IF BEING USED AS MARKER OR TURN LIGHTS
|
|
|
|
|
|
|
|
|
|
|
|
|
STINGER SHORT STALK LED TURN SIGNAL - Clear Lens
|
|
Our Price: $28.00
|
|
|
LOCKHART PHILLIPS USA STINGER SHORT STALK LED TURN SIGNAL BLACK/CLEAR Lockhart Phillips #122-0001
* The hottest look in aftermarket turn signals
* Unique, aerodynamic shape
* Ultra-Brite LED’s
* Length 3 X 3/ 4
* Sold in pairs
* Patented design
|
|
|
|
|
|
|
|
|
|
|
|
|
STINGER SHORT STALK LED TURN SIGNAL - Amber Lens
|
|
Our Price: $28.00
|
|
|
LOCKHART PHILLIPS USA STINGER SHORT STALK LED TURN SIGNAL BLACK/AMBER Lockhart Phillips #122-0000
* The hottest look in aftermarket turn signals
* Unique, aerodynamic shape
* Ultra-Brite LED’s
* Length 3 X 3/ 4
* Sold in pairs
* Patented design
|
|
|
|
|
|
|
|
|
|
|
|
|
RAZOR SHORT STALK LED TURN SIGNAL - Clear Lens
|
|
Our Price: $45.00
|
|
|
LOCKHART PHILLIPS USA RAZOR SHORT STALK LED TURN SIGNAL BLACK/CLEAR Lockhart Phillips #122-8250
* Sharp looking short stalk that is thin and visible
* Stylish lens with Amber LED on backside for better visual
* Ultra-Brite LED’s
* Sold in pairs
|
|
|
|
|
|
|
|
|
|
|
|
|
Y - WRENCH HEX MOOSE
|
|
Our Price: $19.95
|
|
|
* Conveniently sized "Y" handle wrench fits
perfectly in your tool compartment
* 8-in-1 wrench
* Three Allen head sizes: 4mm,
5mm, and 6mm
* Five socket sizes:
8mm, 10mm, 12mm, 13mm, and 14mm
|
|
|
|
|
|
|
